switching_power_logo
 | HOME | PRODUCT | FACTORY SHOW | CERTIFICATE | CONTACT US |
PAGE 1 2 3 4 PRE | NEXT
 AC-DC Power supplies

Adaptor

 Special Features:  

* Wall-mounted,universal input,single output;
* Regulated output with low ripple
* High efficiency,high density,high reliability;

* Over-voltage and short circuit protection
* Low cost design;
* 2 years warranty.

switching_power_1

Output Specification:
Line regulation : 0.5% (Low line to high line)
Load regulation : 5% (Min to full load)
OVP : Yes
Short circuit protectio:Yes
Hold-up time : 10mS @110VAC
Ripple and Noise : ≤
1%

General Specification:
Isolation voltage : 3000VAC
Operating ambient temperature : 0℃ to 40℃
Storage temperature : - 40℃ to 85℃
Tansient recovery time : 2mS, 25% load step
                                            change
Case material : UL94V-0, PC, Black
Safety and approvals : UL, CE, CCC
MTBF : 100,000 hours

Input Specification:
Voltage range : 90 to 264VAC
Frequency range : 47-63Hz

  5W Adaptor Model List:  
Model No. Output Voltage Output Current Ripple & Noise(mv)
Max. Peak
SA005031X-X 3.3Vdc 1.5A 1.8A 50
SA005051X-X 5.0Vdc 1.0A 1.2A 50
SA005121X-X 12.0Vdc 0.45A 0.54A 100
 
   10W Adaptor Model List:  
Model No. Output Voltage Output Current Ripple & Noise(mv)
Max. Peak
SA010031X-X 3.3Vdc 3.0A 3.6A 50
SA010051X-X 5.0Vdc 2.0A 2.4A 50
SA010091X-X 9.0Vdc 1.2A 1.44A 90
SA012121X-X 12.0Vdc 0.83A 1.0A 100

  18W Adaptor Model List:
 
Model No. Output Voltage Output Current Ripple & Noise(mv)
Max. Peak
SA018051X-X 5.0Vdc 3.0A 3.6A 50
SA018091X-X 9.0Vdc 2.0A 2.4A 90
SA018121X-X 12.0Vdc 1.5A 1.8A 100

  30W Adaptor Model List:
 
Model No. Output Voltage Output Current Ripple & Noise(mv)
Max. Peak
SA030121X-X 12.0Vdc 2.5A 3.0A 50
SA030151X-X 15.0Vdc 2.0A 2.4A 150
SA030241X-X 24.0Vdc 1.5A 1.8A 240
SA030032X-X V1:3.3Vdc
V2:9.0Vdc
I1:3.0A
I2:2.0A
3.6A
2.4A
50
90
SA030052X-X V1:5.0Vdc
V2:12.0Vdc
I1:2.5A
I2:1.2A
3.0A
1.4
A
50
120
 

Notes:
1. All specifications are typical at nominal line, full load, and 25? unless otherwise noted.
2. All specifications subject to change without notice, Mechanical drawings are for reference only.

 

PAGE 1 2 3 4 PRE | NEXT
TEL: 0571-85155200 | FAX: 0571- 8869 3686 | EMAIL:info@cnfms.com
famous_pl